October 4, 2022 3:25 pm

UNICOM/ENDE TRANSMISIÓN: ENDE TRANSMISIÓN conducts NOVERAL COURSE ON STATCOM SVC PLUS SYSTEM To La Substación Paradise ENDE TRANSMISIÓN, a subsidiary of Ende Corporation, is implementing the STATCOM system in the Paradise substation of the city of Trinidad (Beni), the first project of its kind in Bolivia.The Statcom Project is composed of latest FACTS equipment, whose […]

UNICOM/ENDE TRANSMISIÓN: ENDE TRANSMISIÓN conducts NOVERAL COURSE ON STATCOM SVC PLUS SYSTEM To La Substación Paradise

ENDE TRANSMISIÓN, a subsidiary of Ende Corporation, is implementing the STATCOM system in the Paradise substation of the city of Trinidad (Beni), the first project of its kind in Bolivia.The Statcom Project is composed of latest FACTS equipment, whose objective is to maintain the Reliability of the National Interconnected System Transmission Network (SIN), in the Northern Area from the country.For the use of this new technology, it was carried out from August 29 to 1 of September 2022 The course on Statcom SVC Plus.

nf_04102022_4

In this sense, as part of the 2022 Management Training Plan, ENDE TRANSMISIÓN has made of Successful way training on Statcom Paraíso SVC Plus, which was attended by the Personnel of the Technical Management, Planning, Operations and Maintenance of ENDE TRANSMISIÓN; as well as staff of the National Cargo Office (CNDC), Ende Guaracachi and Ende Corporation.

The course was taught, in person and virtual by 2 instructors, both with vast experience In statcom projects of the company Siemens Energy Brazil, Nelson Rodrigues Junior and Rodrigo Lemes Da Silva, thus allowing the knowledge of the technical staff of both Transmission, as of other companies in the electricity sector.

The scope of this training was as follows:
  • Introduction SVC Plus
  • Theory about FACTS devices
  • Static Var Compensator Operation Concept (SVC)
  • Multilevel modular converter
  • vscConverter
  • Presentation of the single and trilinear line of the SVC Plus Paraíso
  • Introduction to closed loop control (CLC)
  • SVC Plus Operating Modes – FQM and VCM
  • Block diagram – closed loop control (CLC)
  • Voltage and Slope Control Concept
  • V/Q curves with different only
  • controladorQ (qController)
  • Automatic profit adjustment
  • Hunting detection
  • Simplification of VSC to a voltage source
  • AT/MT bar surface protection
  • VSC current supervision: protection functions
  • Introduction Protection – Basic Functions of the SVC Plus
  • Protection system
  • Principle of Protection – Transformer and Bars
  • Shot relays
  • Shot scheme
  • Protección Hardware – Interface
  • Protection software – DIGSI
  • DIGSI protection software – settings configuration and protection parameters
  • DIGSI Protection Software – Firmware and Parameters Download
  • DIGSI protection software – online income and operation
  • Digital Introduction Fault Recorder (DFR)
  • Other analyzer
  • DFF system wiring connections
  • DFF system software